AtmosAir™ systemen

AtmosAir Matterhorn 1000

Voltage: 120 VAC/240 VAC
Energy Use: 5 watts
Number of Tubes: 1
Tube Size: C/D/E/F
Capacity: Up to 2,500 CFM
Application: The Matterhorn 1000 ionization system is intended to be mounted in a supply duct or air handling unit. The size and number of ionization systems is dependent upon the airflow, size of the space, and severity of the pollution and odors.

AtmosAir Matterhorn 1002

Voltage: 120 VAC/240 VAC
Energy Use: 5 watts
Number of Tubes: 2
Tube Size: C/D/E/F
Capacity: Up to 5,000 CFM
Application: The Matterhorn 1002 ionization system is intended to be mounted in a supply duct or air handling unit. The size and number of ionization systems is dependent upon the airflow, size of the space, and severity of the pollution and odors.

AtmosAir FC100

Voltage: 115V/240 VAC
Energy Use: 5 watts
Number of Tubes: One (1)
Tube Size: C (8″) D (10″) E (15″)
Capacity: Up to 2400 CFM
Application: The AtmosAir FC100 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coils, heat pumps and other unitary type systems. The system can be integrated on an OEM basis, or a retrofit package is also available. Access to the unit’s control panel is provided. The unit will be calibrated at the factory per AtmosAir recommendations or the contractor will calibrate the ionization setting to attain ion level readings of between 350 and 1,500 negative ions/cm3 in the space.

AtmosAir FC400FM

Voltage: 12 VAC
Energy Use: 5 watts
Number of Tubes: One (1)
Tube Size: B (3″)
Capacity: Up to 1400 CFM
Application: The AtmosAir FC-400FM ionization system is intended to be flush-mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump and other unitary type systems. The system can be integrated on an OEM basis or a retrofit package is also provided. The unit will be calibrated at the factory per AtmosAir recommendations to attain ion level readings of between 350 and 1,500 –ions/cm3.

AtmosAir FC400

Voltage: 12 VAC
Energy Use: 5 watts
Number of Tubes: One (1)
Tube Size: B (3″)
Capacity: Up to 1400 CFM

Application: The AtmosAir FC-400 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coil, heat pump and other unitary type systems. The system can be integrated on an OEM basis or a retrofit package is also provided. The unit will be calibrated at the factory per AtmosAir recommendations to attain ion level readings of between 350 and 1,500 –ions/cm3.

AtmosAir Rainier Series

Voltage: 120 VAC
Energy Use: 45 watts
Number of Tubes: One (1)
Tube Size: B (3″)
Capacity: Up to 100 CFM
Application: The AtmosAir Rainier Summit is a standalone self contained compact unit designed to increase ionization levels to restore indoor air to its natural state where no pollution or contaminants exist. The Rainier’s patented active ionization technology has been rigorously tested and scientifically proven to be extremely effective at reducing harmful particulates, irritating volatile organic compounds (VOC’s) and odors as well as killing off mold, bacteria, viruses and germs in the air and on surfaces.

AtmosAir 508FC

Voltage: 120 VAC/240 VAC
Energy Use: < 50 watts
Number of Tubes: Eight (8)
Tube Size: F (21″)
Capacity: Up to 15,000 CFM

Application: The AtmosAir 508FC BPI system is intended to be mounted in a supply duct or supply plenum of an air handling unit. The system can be integrated on an OEM basis or a retrofitted into an existing mechanical system. The size and number of 508FC ionization systems is dependent upon the airflow, size of the space, and severity of the pollution and odors.

AtmosAir 500FC

Voltage: 120 VAC/240 VAC
Energy Use: < 50 watts
Number of Tubes: Five (5)
Tube Size: F (21″)
Capacity: Up to 10,000 CFM
Application: The AtmosAir 500FC BPI system is intended to be mounted in a supply duct or supply plenum of an air handling unit. The system can be integrated on an OEM basis or a retrofitted into an existing mechanical system. The system is calibrated at the factory per AtmosAir recommendations to attain bi-polar ion levels between 500 and 1,500 ions/cm3.

AtmosAir 500EC

Voltage: 120 VAC/240 VAC
Energy Use: < 50 watts
Number of Tubes: 5
Tube Size: E (14″)
Capacity: Up to 8,000 CFM
Application: The AtmosAir 500EC BPI system is intended to be mounted in a supply duct or supply plenum of an air handling unit. The system can be integrated on an OEM basis or a retrofitted into an existing mechanical system. The system is calibrated at the factory per AtmosAir recommendations to attain bi-polar ion levels between 500 and 1,500 ions/cm3.